Abstract
A two-phase heavy crude oil flow with low gas fraction is common in the oil transportation process. However, most of the studies of a gas–liquid flow are based on low viscosity fluid, such as water and light oil; as a result, the results cannot be introduced successfully into the mixture flow of gas and heavy crude oil. In this work, a two-phase flow of gas and heavy crude oil, which originated from the Bo-hai oilfield in China, was investigated in a horizontal pipe with 47-mm inner diameter. Data were acquired for the oil flow rate ranging from 2 m3/h to 10 m3/h, the input gas volume fraction ranging from 0.01 to 0.15, and the viscosity of crude oil ranging from 2.41 Pa·s to 0.34 Pa · s. Based on the drift-flux model, a new simplified correlation was developed to predict the void fraction and the pressure gradient. A comparison between the predicted and measured data demonstrates a reasonable agreement, and the correlation might be helpful for practical application in industry, especially in initially estimating the flow characteristic parameters.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
