Abstract
A simple, very small equilateral triangular microstrip patch antenna (ETMPA) having sides 15mm with an I-slot of optimum length and position on the radiating patch has been designed to generate a wide frequency band. Impedance bandwidth generated by the antenna is 610MHz 10.8%, (5.34-5.95GHz) for (S11 ≤ −10 dB) having broadside radiation pattern with peak gain of 1.66dB. The designed antenna covers Weather Radar application band(5.35-5.45)GHz, Radiolocation and Military application band (5.47-5.57) GHz, Maritime Radar application band (5.57-5.65)GHz, WLAN-Europe(5.470-5.725)GHz, Wi-Fi 5.8(5.725– 5.850)GHz and Dedicated Short-Range Communications(DSRC) band (5.850-5.925)GHz. FR4 material having relative permittivity(er) 4.4 and loss tangent(tanδ) 0.02 has been used as dielectric substrate and thin copper sheet used as radiating patch and ground in the designed antenna. Prior to physical fabrication and measurement, the proposed antenna has been designed and analyzed using commercial High Frequency Structural Simulator (HFSS) ver13 software. Good matching has been observed between measured and simulated results.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.