Abstract
In this paper, a simple method to design a compact triplepassband filter is presented. The proposed filter structure is mainly composed of two half-wavelength input/output (I/O) terminated microstrip lines and three open-loop uniform impedance resonators (UIRs), which are designed for three different passbands. By properly selecting the coupling position between I/O open-ended microstrip lines and each desired resonator, three passbands can be integrated, and the insertion loss can be improved. In order to achieve compact size, the three UIRs are placed on different layers of the substrate. A filter example operated at 1.575 GHz, 1.8 GHz, and 2.4 GHz for GPS, GSM, and WLAN applications is designed using the proposed concept and then fabricated. Experiment results show a good agreement with the simulated performances.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.