Abstract
The method allowed simultaneous characterization of PAHs, nitro-PAHs and quinones in atmospheric particulate matter. This method employs a miniaturized micro-extraction step that uses 500μL of an acetonitrile–dichloromethane mix and instrumental analysis by means of a high-resolution GC–MS. The method was validated using the SRM1649b NIST standard reference material as well as deuterated internal standards. The results are in good agreement with the certified values and show recoveries between 75% and 145%. Limit of detection (LOD) values for PAHs were found to be between 0.5pg (benzo[a]pyrene) to 2.1pg (dibenzo[a,h]anthracene), for nitro-PAHs ranged between 3.2pg (1-nitrobenzo[e]pyrene) and 22.2pg (3-nitrophenanthrene), and for quinones ranged between 11.5pg (1,4-naphthoquinone) and 458pg (9,10-phenanthraquinone). The validated method was applied to real PM10 samples collected on quartz fiber filters. Concentrations in the PM10 samples ranged from 0.06 to 15ngm−3 for PAHs, from<LOD to 69.4ngm−3 for nitro-PAHs, and from 0.27 to 115ngm−3 for quinones. This procedure was found to be precise, accurate and suitable to be employed for determination of polycyclic aromatic compounds in airborne particles from both polluted and non-polluted atmospheres.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
