A simple and general macroscopic model for local-deformation effects in fluid-saturated porous rock

Abstract

SUMMARYWave-induced fluid flows (WIFF) can be viewed as cases of broader local-deformation (LD) phenomena and represent the principal causes of seismic-wave attenuation in fluid-saturated porous rock. Most existing WIFF models refer to greatly simplified microstructures and specific flow patterns, such as planar divergent flows within thin cracks (squirt flows, SF) or flows within patchy-saturation zones. However, such microstructures represent only idealized mathematical models that may be impossible to consistently identify within a given rock. At the same time, most details of such microstructures are insignificant for seismic waves, which are only sensitive to averaged properties of the medium. To perform microstructure-independent modelling of LD effects, we develop a simple yet general approach based entirely on a macroscopic local-deformation variable. This variable is broadly analogous to Biot's fluid content and is illustrated for two specific microstructural models. The macroscopic model is Biot-consistent and uses only time- and frequency-independent material properties. Both local and global (Biot's) pore flows and all types of waves and deformations are explained in a rigorous and consistent manner. The model allows constraining a minimal set of material properties responsible for all observed elastic and anelastic effects in porous rock. Because of making no assumptions about the microstructures and their spatial scales, this approach should comprise at least some of the existing WIFF models. In particular, this model accurately reproduces all attenuation and velocity dispersion spectra predicted by a broadly used SF model. The model also contains effects not considered previously, such as bulk viscosity of pore fluid and viscous coupling between the rock frame and fluid-filled pores. The model offers straightforward extensions to multiple porosities and cases of viscous fluids in primary pores. Based on the resulting differential equations, physically consistent schemes for numerical modelling of seismic wavefields can be developed for porous rock with arbitrary LD effects.