A seven-sensor configuration method for testing thermal error of a horizontal machining center with linear optical grating scale

Abstract

A precision testing method based on a seven-sensor configuration is presented in this paper to quantify thermal errors (drifting, elongation, tilting) of the mandrel cross-section, for an example horizontal machining center with linear optical grating scale. Three tri-axial displacement sensors with 120° spread angles and 36 thermal couples are mounted on judiciously chosen locations to record the temperatures and thermal expansions for various operating conditions. Based on the measurements covering a wide range of spindle locations, environment temperatures, coolant temperature, and spindle rotational speeds, we found that (i) the maximum thermal drifts of the mandrel are 11.3 µm in the x direction with a compensation rate of 62%, and 165.3 µm in the y direction with a compensation rate of 93%, (ii) the maximum thermal tilt of the mandrel is 0.005°, and (iii) the thermal elongation of the mandrel in the z direction, which could not be compensated by the linear optical grating scale, is 51.9 µm. From a correlation study, the thermal elongation of the mandrel is most closely correlated to the temperatures recorded for the thermal couple mounted at the front surface of the spindle bearing with a correlation coefficient of 0.83.