A set of graphical design criteria for slotted liners in steam assisted gravity drainage production wells

Abstract

Slotted liners have been widely used in steam-assisted gravity drainage (SAGD) wells owing to their low cost and superior mechanical integrity. Multiple factors affect the performance of slotted liners, such as particle size distribution (PSD) of formation sands, aperture size, slot density, fluid flow rate, and wellbore operational conditions. Currently, most of the existing design criteria formulate the lower and upper bounds of the aperture based on one or several points on the particle size distribution curve of oil sands. Most of these design criteria neglect the slot density, wellbore operational conditions, and shape of PSD curve.This study carries out a series of large-scale pre-pack sand retention tests (SRT) in step rates. The aim is to investigate the impacts of aperture size, slot density, and fluid flow rate on the slotted liner performance. Comprehensive design criteria for determining the safe aperture window are presented to maintain the sanding and the wellbore plugging of the zone near the slotted liners within an acceptable level. Sand production governs the upper bound of the aperture size, and flow performance guides the lower bound of the aperture size. The new criteria are presented graphically to illustrate the optimal slot window as a function of the sand PSD, slot density, and fluid flow rate. The results of separate tests are used to demonstrate the performance of the new design criteria. The optimal slot window obtained via the new design criteria guides the slot liner selection in the SAGD process.