Abstract
A conventional laboratory method for the determination of glyphosate and its degradation product aminomethylphosphonic acid (AMPA) is high performance liquid chromatography (HPLC) followed by post column derivatization with o-phthaldialdehyde (OPA). However, AMPA is partly decomposed in the process causing a deviation in the AMPA detection or even making a simultaneous detection of glyphosate and AMPA with the described postcolumn procedure impossible. We used a compact sequential injection analysis system and optimized the process conditions for both analytes independently from each other. The process conditions were adjusted to the different chemical characteristics of AMPA (primary amine) and glyphosate (secondary amine), which needs to be oxidized to a primary amine prior to the derivatization. An ion exchange column was included in the system to eliminate amines interfering with the method. Limits of detection of 16 and 9 µg L -1 for glyphosate and AMPA, respectively are similar to those achieved with HPLC methods reported in literature, but compared to conventional HPLC methods only small amounts of reagents are consumed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.