Abstract
A non-enzymatic amperometric sensor using natural molybdenite (MLN) electrodeposited with methylene blue (MB) has been fabricated and characterized and its analytical performances were investigated for the determination of ascorbic acid (AA). The surface morphology of the electrode modified by electrodeposited MB was studied by use of the Advanced Mineral Identification and Characterization System (AMICS) and laser confocal high-temperature scanning microscope (LCSM). The poly(MB) and MLN immobilized sensor showed good stability, reproducibility, sensitivity, and selectivity. It exhibited a linear performance range from 3 to 1000μM, with a lower detection limit of 0.083μM (signal/noise = 3) and short response time (< 5s). No obvious decrease in the current was observed after 20days storage. The methodology reproducibility of this sensor was 2.6%. It showed good anti-interference ability for the potential interfering compounds. The poly(MB) film not only can enhance the electron-transfer rate but also increase the lifetime of the sensor. This study demonstrated the applicability of natural molybdenite for the fabrication of non-enzymatic electrochemical AA sensor.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
