Abstract
Reliable flame monitoring is essential to enhance the safety of industrial boilers. This paper presents a new self-diagnostic system to measure the oscillation frequency of a burner flame. The system incorporates three sensors including a microphone, a photodiode and an electrostatic electrode and simultaneously acquires three signals. The oscillation frequencies from the three sensors are determined through power spectral analysis, and a fused result of the three frequencies is obtained as the oscillation frequency of the burner flame. Moreover, detection and location of the system faults are realized using a self-diagnostic algorithm through the cross-correlation signal processing. Experimental tests were performed on a laboratory-scale combustion test rig with methane as the test fuel. The results demonstrate that the method is capable of measuring the oscillation frequency of a burner flame. In addition, the results are helpful for the comprehensive analysis of the oscillatory behaviors of burner flames. The self-diagnostic algorithm is able to detect the fault of the monitoring system and no additional self-diagnostic hardware is required.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
