Abstract
Pyro-phototronic and piezo-phototronic effect have shown their important roles for high performance heterojunction-based photodetectors (PDs). Here, a coupling effect of pyro-phototronic and piezo-phototronic effect is utilized to fabricate a self-powered and broadband PD based on the MAPbI3 single-crystal film/n-Si heterojunction. First, by using the pyro-phototronic effect derived from MAPbI3 , the maximum photoresponsivity of the self-powered PD is 1.5mAW-1 for 780nm illumination, which is enhanced by more than 20 times in consideration of the relative peak-to-peak output current. Light-induced temperature change in MAPbI3 film will create pyro-charges distributed at heterojunction interface, resulting in a downward bending of the energy band, facilitating the transport of photon-generated electrons and holes, and generating spike-like output currents. Second, piezo-phototronic effect is further introduced by applying vertical pressures onto the PD. With a vertical pressure of 155kPa, the responsivity can be improved by more than 120% compared to the condition with no pressure. The overall enhancement is due to the piezo-phototronic and pyro-phototronic coupling effects which utilize the polarization charges to modulate the band structure of heterojunction. These results provide a promising approach to develop high-performance self-powered and broadband perovskite-based PDs by coupling pyro-phototronic and piezo-phototronic effect.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.