Abstract
Miniaturised piezoelectric devices are emerging energy harvesting sources that are appropriate for various implantable and wearable applications. However, these piezoelectric devices exhibit considerable internal resistance due to their internal impedance, which leads to self-start and low-energy conversion failures. This paper describes a dual-stage boost converter circuit by facilitating self-powering features and boosting the low voltage harvested by the piezoelectric devices into dc. The proposed circuit comprises conversion stages of ac-dc and dc-dc in Stages I and II, respectively. In addition, the proposed circuit does not require employing the auxiliary circuits to generate the train pulses by triggering the bidirectional switches to envelop the current being stored in Stage II and kick-start the self-powered circuit for piezoelectric energy harvesting systems. Theoretical assumptions and control strategies were tested and verified with ideal and impedance input sources. The proposed circuit could convert a low voltage of 3 Vac into 19 Vdc. The maximum attained output power by the proposed circuit was 3.61 mW. The outcome depicted that the proposed circuit boosted the low voltage and outperformed the existing literature circuits in terms of output voltage and power.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.