A Self-Powered Broadband Photodetector with High Photocurrent Based on Ferroelectric Thin Film Using Energy Band Structure Design

Abstract

Self-powered photodetectors have the advantages of high sensitivity, sustainability, and small size and have become a research hotspot in advanced optoelectronic systems. However, the low output photocurrent density seriously hinders the practical application of ferroelectric self-powered photodetectors. Herein, the high-efficiency photoelectric detection performance of the Bi1-xHoxFeO3 ferroelectric self-powered photodetector is realized by doping Ho. The responsivity (R) and detectivity (D*) can reach 0.0159 A/W and 1.94 × 1011 Jones under monochromatic light with a wavelength of 900 nm. Meanwhile, the R and D* can reach 0.022 A/W and 2.65 × 1011 Jones under sunlight. These excellent photodetection performances are attributed to the high short-circuit current density (Jsc). When the Ho content is 6%, the output photocurrent reaches up to 0.81 mA/cm2. The systematic structure and photo-electric characteristic analysis suggest that the decrease in the band gap leads to the generation of a larger photocurrent while the ferroelectric polarization is reduced slightly. This work provides a new way to obtain high-performance self-powered photodetectors.