A Self-Calibration Method for Non-Orthogonal Angles of Gimbals in Tri-Axis Rotational Inertial Navigation System

Abstract

Navigation accuracy of the inertial navigation system (INS) could be greatly improved by rotating the inertial measurement unit around gimbals. However, the attitude output accuracy of rotational INS (RINS) would be affected by the non-orthogonal angles of gimbals, which should be accurately calibrated and compensated. In this paper, a novel self-calibration method for non-orthogonal angles of gimbals is proposed in tri-axis RINS. The three non-orthogonal angles could be calibrated using attitude errors and velocity errors as measurements without external equipment. The self-calibration scheme in this method could reduce the coupling of non-orthogonal angles with other errors, and the observability is clear to demonstrate during calibration. The proposed method is verified by both simulations and experiments. The experimental results show that the calibration accuracy of non-orthogonal angles could be less than 2”, and after compensation, the attitude output accuracy is improved from 200” to less than 10”. Therefore, the proposed calibration method could greatly improve the attitude output accuracy and make RINS more effective in some task systems where high attitude output accuracy is urgently required.