Abstract

A self-aligned vertical comb-drive actuator for a two-axis tilt scanning micromirror is presented. Self-alignment between moving and fixed fingers is essential in order to avoid lateral instability leading to an in-plane rotational pull-in during an actuation. Multilayered masking films have been utilized to fabricate the self-aligned comb fingers. To generate high electrostatic torque, high-aspect ratio comb-drive actuators with 40 µm thick fingers have been realized on a silicon-on-insulator (SOI) wafer utilizing deep reactive ion etching (DRIE) technology. A delay-mask process (DMP) was employed in an etching step of a silicon device layer to assist etching of a buried oxide (BOX) layer at the bottom of narrow (5 µm) and deep (40 µm) silicon trenches. The DC mechanical scan angles of the actuators employed in the two-axis tilt, gimbal-configured micromirror were measured as ±2.1° at 48 V around an inner axis and ±1.8° at 44 V around an outer axis, respectively. The fabricated micromirror with a mirror area of 1 mm × 1 mm has mechanical resonant frequencies of 1.2 kHz around the inner axis (a mirror only) and 0.9 kHz around the outer axis (a frame and the mirror), respectively.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call