Abstract
Wide bandgap (WBG) power devices can work at higher switching frequencies compared to silicon competitors. It helps reduce the volume of passive components but brings more serious electromagnetic interference (EMI) noise issue. The increased noise filtering requirements may restrict the power density improvement. This study discusses the conducted EMI issue and noise filtering in the four-switch buck-boost DC/DC converter (FSBB). The differential mode (DM) and common mode (CM) noise model embedded with noise sources features are derived and analyzed. It is found that modifying the spectral distribution of the CM noise is a challenge when the duty cycles are fixed by voltage gain. Inspired by the CM model, a phase-shifted modulation method is proposed to achieve selective CM noise mitigation. The recommended operating range and the implementation process are presented. The theoretical modeling and the proposed method are verified through a FSBB converter with 48V input and 100kHz switching frequency. And experimental results validate that the proposed method can achieve 30% volume reduction of the CM filter.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.