A sample pretreatment strategy for pH-zone-refining counter-current chromatography

Abstract

A sample pretreatment method using acid–base extraction was established for pH-zone-refining counter-current chromatography (CCC) to increase the yield of the target compound. As the most important step, selection of two-phase solvent system for pH-zone-refining CCC should follow some rules. One of these rules is that when pH of two-phase solvent system is around 2 (for an acidic analyte) or 10 (for a basic analyte), partition coefficient values of Kacid or Kbase should be much greater than 1. According to this rule, a new pretreatment method was developed that could substantially increase the yield of the target compound in pH-zone-refining CCC. The separation of the crude alkaloids extracted from the seeds of Sophora alopecuroides was selected as an example to show the advantage of this method. Before CCC separation, 20g of crude sample was extracted 3 times with the selected two-phase solvent system composed of MtBE–CH3CN–H2O (2:2:3, v/v), where pH of the upper phase was adjusted with triethylamine to 10. A 10g amount of the second basic extract thus obtained was subjected to pH-zone-refining CCC separation. As a result, 169mg of sophoramin and 696mg of sophoearpin were isolated from the second basic extract, where the yields have been doubled compared with those of the untreated sample (crude sample). Experimental results showed that the present method for pretreating the crude sample could produce substantially higher yields of target compounds in pH-zone-refining CCC.