Abstract

Volterra equalizer (VE) is a well-known and effective algorithm to deal with the linear and nonlinear distortions in optical interconnect, but the high computational complexity hinders its practical application. Generally, sparse VEs based on ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">1</sub> - or ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> -regularization are good ways to reduce the complexity by discarding some inessential taps. However, a tap threshold needs to be chosen in these sparse VEs like the threshold-based pruned retraining VE (TR-VE) to decide the discarded taps. And this tap threshold should be adjusted fine to balance the reduced complexity and equalization performance, especially when the testing environments alter. Thus, the reduced complexity in these sparse VEs may fluctuate. To address this issue, a robust and stable complexity reduced sparse VE using ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> -regularization (ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> -SR-VE) is proposed in this paper. The recursive least square (RLS) algorithm is used to replace the least mean square algorithm for the faster convergence speed and better equalization performance. The complexity of this equalizer depends on its parameters but not the tap threshold. Once the equalizer parameters are determined, the complexity would not change with the system characteristics, contributing to higher practicability. In our experiment, a 150 Gbit/s PAM8 signal transmission system based on intensity modulation and direct detection (IMDD) is achieved, and a dual-drive Mach-Zehnder modulator for optical single-sideband signal generation is used to mitigate the power fading effect. The experimental results show that with the help of ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> -SR-VE, the reduced complexity percentage is stable at 66.18% compared with the RLS-based VE, even after 75 km standard single-mode fiber (SSMF) transmission. By using this equalizer, 4×150 Gbit/s PAM8 signals have also been successfully transmitted over 30 km SSMF at C-band. The reduced complexity variation of ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> -TR-VE is >20%, but the reduced complexity of the proposed ℓ <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0</sub> -SR-VE is stable at 60% even after 30 km SSMF for all four lanes.

Highlights

  • Driven by the diverse new applications such as the 5th generation (5G) mobile communication, virtual reality, and cloud computing, high-capacity data center interconnect (DCI) with simple structure and low cost is highly desired

  • We extend our previous work in [18] and experimentally demonstrate transmission of 4 × 150 Gbit/s PAM8 signal over 30 km standard single-mode fiber (SSMF) at C-band by using the proposed 0-SR-Volterra equalizer (VE)

  • With the help of VE, 150 Gbit/s PAM8 signal is experimentally transmitted over 40 km SSMF at C-band, and no chromatic dispersion (CD) compensation due to the use of dual-drive Mach-Zehnder modulator (DDMZM)

Read more

Summary

Introduction

Driven by the diverse new applications such as the 5th generation (5G) mobile communication, virtual reality, and cloud computing, high-capacity data center interconnect (DCI) with simple structure and low cost is highly desired. Nation of intensity modulation and direct detection (IMDD) system and 4-level pulse amplitude modulation (PAM4) format is an attractive solution for DCI by considering power consumption, transmission performance, and complexity of transceivers. W. Cheng et al.: Robust Sparse RLS-Volterra Nonlinear Equalizer Using 0-Regularization for 4 × 150 Gbit/s IMDD current bandwidth-limited components, PAM8 with high spectrum efficiency would be a good candidate. To generate an optical SSB signal, a dual-drive Mach-Zehnder modulator (DDMZM) is more attractive in IMDD systems compared with a dual-parallel modulator (DPMZM) due to its low cost [5]–[8]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call