Abstract
This paper presents a robust, capacitive digital read-out circuit (ROC) for sensitive skin applications in humanoid robots. The ROC can be calibrated to null the parasitic effects of transducer variation due to physical assembly. A prototype is fabricated in a 130 nm RFCMOS process, with an active area of $221\times 79~\mu \text{m}^{2}$ and 1.84 $\mu W$ power consumption at $V_{\mathrm {DD}}=1.2\text{V}$ and 1ms read-out rate. The ROC output is robust to $V_{\mathrm {DD}}$ and temperature variations in a range ${|\Delta V_{\mathrm {DD}}|}\leq 20\%$ and (25–53) °C. Furthermore, it can provide up to 200m $V_{\mathrm {pp}}$ power supply sine wave rejection in the range 50Hz–5MHz at $V_{\mathrm {DD}}=1.1\text{V}$ , for an output standard deviation lower than one LSB. Owing to its features and its digital modularity, the ROC was co-designed with a scalable and modular Multi-Walled Carbon NanoTube (MW-CNT) Nano composite transducer, to achieve tunable output sensitivity by adjusting the sensor nominal capacitance and the reference capacitance. The maximum sensitivity of 5.23 fF per LSB was reached when both match. The ROC was then validated with the MW-CNT nanocomposite sensor which exhibits a piecewise behaviour. 5.3 and 7.1 ENOB were extrapolated in the low-load and medium-load regions, respectively. Besides the major advantage of tunable sensitivity, the presented ROC features the lowest acquisition time and one of the most compact sizes among the state-of-the-art ROCs. Moreover, process voltage and temperature (PVT) robust output and ultra-low power consumption make this solution very attractive to replicate human physiology at robotic-level.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have