A Rheological Study of Xanthan Polymer for Enhanced Oil Recovery

Abstract

ABSTRACTThis study explored the potential application of xanthan gum as a polymer-flooding agent for oil recovery applications in a specific Devonian oil field. Rheological measurements using oscillatory and steady shear were carried out to examine the change in shear viscosity when the polymer was applied under reservoir conditions. The xanthan rheological properties were described by the Herschel–Bulkley and Ostwald models to characterize its non-Newtonian behavior. As expected, the results showed that higher xanthan concentrations raised the polymer viscosity and increased the degree of shear thinning. Addition of alkalis caused the viscosity of the xanthan solutions to decrease, but they maintained their shear-thinning properties. Polymer solutions in typical oil field brine increased in viscosity by ca. 400% for 720 hours storage time. On the other hand, as expected, the solutions lost their viscosity gradually with increasing temperature. However, at reservoir temperature (68°C), the polymer solutions kept more than 60% of their initial viscosity. In oscillatory deformation tests it was observed that all the measured viscoelastic properties were influenced by temperature and confirmed that xanthan solution behaved as a weak-gel. An order-disorder transition exists within the xanthan-brine solutions which responds to changes in solution concentration, temperature and alkalis.