Abstract

The corrosion behavior of aluminum (Al) in alkaline media in presence of some natural polymer inhibitors has been reinvestigated. The inhibition action of the tested inhibitors was found to obey both Langmuir and Freundlich isotherms models. The inhibition efficiency was found to increase with increasing the inhibitors concentration and decrease with increasing the temperature, suggesting physical adsorption mechanism. Factors such as the concentration and geometrical structure of the inhibitor, concentration of the corrosive medium, and temperature affecting the corrosion rates were examined. The kinetic parameters were evaluated, and a suitable corrosion mechanism consistent with the kinetic results obtained is suggested and discussed.

Highlights

  • Aluminum and its alloys are known as attractive materials which have a wide application in engineering technology owing to their low cost, light weights, and high thermal and electrical conductivities [1]

  • Most of workers have directed their research towards concentrated alkaline media, which permit optimum performance of the air cathode and a low level of aluminum polarization during normal operation [20]

  • The safety of environmental issues of corrosion inhibitors which may be arise in industry has always been a global concern

Read more

Summary

Research Article

The corrosion behavior of aluminum (Al) in alkaline media in presence of some natural polymer inhibitors has been reinvestigated. The inhibition action of the tested inhibitors was found to obey both Langmuir and Freundlich isotherms models. The inhibition efficiency was found to increase with increasing the inhibitors concentration and decrease with increasing the temperature, suggesting physical adsorption mechanism. Factors such as the concentration and geometrical structure of the inhibitor, concentration of the corrosive medium, and temperature affecting the corrosion rates were examined. The kinetic parameters were evaluated, and a suitable corrosion mechanism consistent with the kinetic results obtained is suggested and discussed

Introduction
Results and Discussions
Rc are the corrosion rates of
Table media
Figure alkaline
The overall electrochemical process is
Rh NT
Alginate Pectates
Alginate Pectate
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call