Abstract
Abstract Hydrogen transport by blending hydrogen into natural gas transmission pipelines and by pure-hydrogen pipelines is a prospective mode of energy transmission during the transition to renewables. The risk of hydrogen embrittlement (HE) in pipeline steels must first be quantified to ensure safe pipeline operation. This review provides an overview of HE in pipeline steels. Most pipeline steels have reduced ductility when exposed to hydrogen partial pressures of 100 bar and above. Higher-strength pipeline steels (X80 and X100) have been found to undergo HE at ∼50 bar hydrogen. Hydrogen-induced subcritical crack growth in pipeline steels has not been reported in the literature. There are few articles on HE in pipeline welds, with some indications that the weld is more susceptible to HE, and some indications that it is less. The relationship between hydrogen pressure and absorbed hydrogen concentration has not been evaluated. Gaps in knowledge are identified in the conclusions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
