Abstract
A humidity sensor film was fabricated by loading high numbers of multi-wall carbon nanotubes (MWCNTs) in a poly(acrylic acid) (PAA) polymer matrix containing poly(4-styrenesulfonic acid) (PSS) to enhance the MWCNT dispersion. Cross-section images demonstrate that the MWCNTs distribute evenly throughout the matrix. The fabrication processes and sensing mechanisms of the film are explained to investigate the flexible properties and humidity-sensing characteristics of the film. The film loaded with 33wt% MWCNTs is much more flexible than an overhead projector (OHP) film and shows similar electrical resistance to pure CNT Bucky paper. The sensor film composed of 1:2 MWCNTs:PAA is highly sensitive to humidity (0.069/%RH) and displays good linearity (0.99).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
