Abstract
Plasma ignition and combustion enhancement is a promising technology in applications of engines, industrial burners, pollutant emissions controls, etc. A new repetitive electrothermal plasma jet ignition system based on ablated capillary discharge under atmospheric pressure is presented in this paper. It consists of a capillary discharge module, a pulse current circuit, a pulse voltage circuit, a current release unit, an LC series resonant circuit, and a control system. The effects of the energy storage capacitor's voltage and resistance in the current release unit on the electrical parameters are investigated. Increasing the capacitor voltage helps to shorten the discharge delay and increase the energy deposition efficiency in the main discharge process. The increase of the resistance in the current release unit leads to a longer discharge delay and higher energy deposition efficiency in the main discharge process. Balanced parameters between the delay of discharge in 66 µs and the energy deposition efficiency in 84% are achieved through optimization, with a peak radiative heat flux of 23MWm-2 and a maximum jet length of 17cm. Repetitive capillary discharge at 20Hz under atmospheric pressure is achieved with the dispersion of energy storage capacitor charging voltage and energy deposition efficiency of 0.3% and 9.6%, respectively. Simplified circuit topology and control logic contribute to the miniaturization of the ignition system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
