Abstract
The Basic Insulation Level (BIL) design of long Medium Voltage (MV) lines was generally based on the nearby lightning performance estimated by models and measurements using floating lines. This resulted in a BIL overdesign that caused more equipment failures due to direct lightning strikes to the line. A methodology whereby the measured polarity of the Lightning Generated Current (LGC) could distinguish between nearby and direct lightning strikes to a long operational line was used to determine the nearby lightning performance of the line. The measurements of this research were compared to the IEEE Std 1410–2010 estimations for a floating line and revealed that the nearby lightning performance of an operational line was much better than for a floating line. This was due to much lower Lightning Induced Overvoltage (LIOV) amplitudes on the operational line compared to a floating line.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.