Abstract
An effective reduced-order model is presented in this paper for the vibration analysis of a mistuned blade–disc–shaft assembly considering the flexibility of the shaft and the rotordynamic effects. For the sake of accurate modeling and quantitative analysis, three-dimensional (3D) finite element models were employed in obtaining the governing equations of motion with the Coriolis force, centrifugal stiffening, and spin softening effects taken into account. Then, an efficient model order reduction technique based on the coordinate projection by normal modes of tuned assembly and cyclic symmetry analysis was developed for mistuned blade–disc–shaft assembly. The criterion of whether one matrix could be incorporated in cyclic symmetry analysis is presented. During the modeling, the mistuning in blade and disc was taken into account and dealt with independently. In mistuning projection, the blade and disc parts were both projected onto their tuned counterparts of the sector model, where the boundary conditions were set to be fixed and free, respectively. Finally, an example of a blade–disc–shaft assembly was employed to validate the effectiveness of the presented method in free and forced vibration analysis.
Highlights
Blade–disc–shaft assemblies are the key components of engines and compressors and take an important position in the design of these machines [1]
A reduced-order model for the vibration analysis of mistuned blade–disc–shaft assemblies is presented, where the rotordynamic effects are all taken into account
An effective reduced-order model was presented for the vibration analysis of a mistuned blade–disc–shaft assembly
Summary
Blade–disc–shaft assemblies are the key components of engines and compressors and take an important position in the design of these machines [1]. Developed an analytical model for the coupling vibration analysis of a blade–disc–shaft system In these investigations, the mistuning in blades and discs, which is an inevitable issue due to manufacturing tolerances, material deviations, and in-service wear, tended to be neglected. SNM, FMM, and CMM are more efficient methods, as they were proposed with respect to mistuned bladed discs In these investigations, the shafts were commonly assumed to be rigid and their flexibilities tended to be neglected. A reduced-order model for the vibration analysis of mistuned blade–disc–shaft assemblies is presented, where the rotordynamic effects are all taken into account.
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
