Abstract
A reconfigurable digital bridge for calibrating four terminal-pair (4-TP) defined impedance standards in the whole complex impedance plane by means of fully digital (FD) operation of the bridge and for R-R,C-C calibration and ac quantized Hall resistance experiments by involving reference inductive voltage divider in digitally assisted (DA) configuration has been built at CMI in recent years. For the purposes of the bridge, high-accuracy digital voltage sources operating in the audio frequency range with full isolation between modules and with battery operation mode have been developed. Together with coaxial switches with negligible crosstalk between channels, the voltage sources form the basis for full automation of the calibration process. The bridge has been tested in both FD and DA configurations. Depending on the configuration, different relative accuracies of the measurements can be achieved in the range from a few parts in 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">8</sup> to a few parts in 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">5</sup> .
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Instrumentation and Measurement
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
