Abstract
A rapid on-line non-chromatographic hydride generation atomic fluorescence spectrometry is described and determination of inorganic arsenic (iAs (III) and iAs (V)) species is achieved within a single run. Thioglycolic acid (TGA) was used for on-line pre-reduction of iAs (V) and quantification of arsenic species was accomplished via calibration with one As form; as iAs (III). Samples and calibration standards were prepared in Tris buffer (pH:7.2) for selective hydride generation and without on-line pre-reduction, iAs (V) signal was negligible up to 150 ng ml−1. The limit of detection (LOD) values for iAs (III) and iAs (V) were 27 pg ml−1 and 36 pg ml−1, respectively. Recovery studies were performed, certified reference material (TMDA-61) was used to test the accuracy of the method and the results were in good agreement. iAs (V) was the main form in all water samples whereas iAs (III) concentration was <LOD value for some samples.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.