Abstract
A simple and effective method was developed for analyzing dinotefuran and its three metabolites (MNG, UF, and DN) in plum using liquid chromatography-tandem mass spectrometry (LC-MS/MS). Due to the polarity and high water miscibility, dinotefuran and some of its metabolites (especially DN) have some limitations to be extracted with acetonitrile and salt following the “QuEChERS” sample preparation methodology. Alternatively, the samples were extracted with methanol, and purified with dispersive-solid phase extraction procedure (d-SPE) using primary secondary amine (PSA) and C18 sorbents after filtration, and mass up. Due to the suppression effect originated from plum matrix, matrix-matched calibration curves, which provided good linearity with coefficient of determination (R2)≥0.998, were used for quantification of all analytes. Blank plum samples fortified with 2 spiking levels (10×LOQ and 50×LOQ) yielded satisfactory recoveries for all tested analytes in the range of 83.01 to 110.18% with relative standard deviation (RSD)≤8.91. The method was successfully applied to field-incurred plum samples and dinotefuran and all metabolites were positively detected and quantified. In conclusion, we suggest that the method can be expanded to polar compounds having solvent and partitioning problems in any of the versions of QuEChERS.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
