Abstract
A quasi-Yagi antenna is developed to operate at 2.4 GHz (ISM band) presenting a low profile and off-axis radiation when packaged over a metal ground plane. The off-axis radiation is realized by incorporating a Jerusalem cross frequency selective surface (JC-FSS) as the ground plane for the antenna. A JC-FSS is preferred because of its frequency stability in the operating band for a large angular spectrum (≈70°) of TE- and TM-polarized incident waves. In this research, the substrate of the antenna flush-mounted on top of the FSS is added to the JC-FSS model and allows for a smaller cell grid. The prepared quasi-Yagi antenna over the JC-FSS offered 260 MHz of functional bandwidth and 54° of beam tilt towards the end-fire direction. To the best of the authors’ knowledge this is the first instance that these two structures are combined for off-axis radiation. Additionally, to support the preferred use of the JC-FSS, the quasi-Yagi is backed by a square patch (SP) FSS for comparison purposes.
Highlights
A Quasi-Yagi Antenna Backed by a Jerusalem Cross Frequency Selective SurfaceA quasi-Yagi antenna is developed to operate at 2.4 GHz (ISM band) presenting a low profile and off-axis radiation when packaged over a metal ground plane
The work presented in this paper introduces a quasi-Yagi antenna over a metal reflector with off-axis radiation at 2.4 GHz (ISM band)
The most significant adjustments are the reduction of the driver to director separation (30%) and the decrease of the overall substrate profile (33%)
Summary
A quasi-Yagi antenna is developed to operate at 2.4 GHz (ISM band) presenting a low profile and off-axis radiation when packaged over a metal ground plane. The off-axis radiation is realized by incorporating a Jerusalem cross frequency selective surface (JC-FSS) as the ground plane for the antenna. A JC-FSS is preferred because of its frequency stability in the operating band for a large angular spectrum (≈70∘) of TE- and TM-polarized incident waves. The substrate of the antenna flush-mounted on top of the FSS is added to the JC-FSS model and allows for a smaller cell grid. The prepared quasi-Yagi antenna over the JC-FSS offered 260 MHz of functional bandwidth and 54∘ of beam tilt towards the end-fire direction. To support the preferred use of the JC-FSS, the quasi-Yagi is backed by a square patch (SP) FSS for comparison purposes
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: International Journal of Microwave Science and Technology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.