Abstract

Load flow analysis is an essential tool for the reliable planning and operation of interconnected power systems. The constant increase in power demand, apart from the increased intermittency in power generation due to renewable energy sources without proportionate augmentation in transmission system infrastructure, has driven the power systems to function nearer to their limits. Though the power flow (PF) solution may exist in such circumstances, the traditional Newton–Raphson based PF techniques may fail due to computational difficulties owing to the singularity of the Jacobian Matrix during critical conditions and faces difficulties in solving ill-conditioned systems. To address these problems and to assess the impact of large-scale photovoltaic generator (PVG) integration in power systems on power flow studies, a derivative-free quasi-oppositional heap-based optimization (HBO) (QOHBO) technique is proposed in the present paper. In the proposed approach, the concept of quasi-oppositional learning is applied to HBO to enhance the convergence speed. The efficacy and effectiveness of the proposed QOHBO-PF technique are verified by applying it to the standard IEEE and ill-conditioned systems. The robustness of the algorithm is validated under the maximum loadability limits and high R/X ratios, comparing the results with other well-known methods suggested in the literature. The results thus obtained show that the proposed QOHBO-PF technique has less computation time, further enhancement of reliability in the presence of PVG, and has the ability to provide multiple PF solutions that can be utilized for voltage stability analysis.

Highlights

  • Power flow analysis is a powerful and most widely utilized analytical tool to determine steady-state planning, operation, and energy management of the power system

  • The proposed QOHBO-LFP with embedded photovoltaic generator (PVG) was implemented in MATLAB version 8.1.0.604 R2013a, and the program was run on Intel (R) CoreTM i5 (CPU)

  • Unlike other evolutionary techniques suggested in the literature, QOHBO-load flow (LF) depends only on two control parameters, namely population size and convergence criteria

Read more

Summary

Introduction

Power flow analysis is a powerful and most widely utilized analytical tool to determine steady-state planning, operation, and energy management of the power system. The main objective of the power flow analysis is to determine the voltage phasors at all the buses by making use of the specified generation and load of the power system [1,2]. This load flow (LF) problem is solved by using various numerical computational techniques by utilizing the non-linear power injection models that are functions of bus voltage phasors and bus admittances [3]. In the literature [4], many techniques follow similar computation procedures to solve the LF problem These techniques start with an initial guess to determine the real and reactive power injection mismatches at the nodal buses. Similar to [5], the authors in [6]

Methods
Results
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call