Abstract
Conventional air source heat pumps suffer from frosting in winter and consume a large amount of electricity for defrosting. Meanwhile, ventilation heat recovery is an important approach to energy saving in buildings. This paper conducts a proof-of-concept study of a novel ventilation heat recovery vapour injection air source heat pump. A prototype is built and tested. It has a unique defrosting process driven by the warm exhaust air from buildings. In the normal operation, the exhaust air is first cooled down by a medium-pressure evaporator. It is then mixed with the ambient air to heat the low-pressure evaporator. Both theoretical simulation and experimental validation are carried out. The results show that the proposed heat pump can significantly decrease the thermodynamic irreversibility and electricity consumption, thus leading to a higher efficiency. For the novel heat pump, the coefficient of performance increased from 3.8 to 4.5 when the ambient temperature varied from −5°C to 10 °C. Furthermore, the defrosting process using exhaust air is fast and efficient. The defrosting duration (within 4 mins) is less than 30% of the frosting period at 0 °C, with little power consumption. Consequently, the prototype has demonstrated an enhanced performance with high flexibility and feasibility. It tackles the challenges of conventional air source heat pumps and is promising in the cold climate area application.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.