A profound study of damage behavior for Al 2024-T3 alloy worksheet produced by constrained groove pressing in the superior practical condition

Abstract

Constrained groove pressing (CGP) process is one of the most efficient and novel methods of severe plastic deformation to manufacture ultra-fine sheet metal. The present research work is related to the study of CGP process of 2024-T3 Aluminum alloy sheet. The empirical and numerical simulation of CGPed- specimens have been examined at both room and elevated temperatures. In order to simulate the constrained groove pressing process in Abaqus software, the Johnson–Cook material model has been employed. The geometrical variables of the CGP process include the teeth number, teeth angle, and sheet thickness, and the criterion for the superiority of the numerical test is the maximum reduction of two equivalent strain and equivalent force factors, simultaneously. To determine the weight’s coefficients of the target factors and select the superior test, the Shannon’s Entropy and Simple Additive Weighting (SAW) methods have been used, respectively. After validating the numerical findings, the variation of damage parameter, stress triaxiality and the equivalent plastic strain distribution in the superior practical condition have been evaluated in detail. Based on the Entropy-SAW hybrid technique, the weight’s coefficients of equivalent strain and equivalent force target factors were computed to, in turn, 0.38 and 0.62. Also, the results revealed that the CGP process could not be performed at room temperature based on high damage evolution. But, at elevated temperature, the damage parameter (D) doesn't exceed 0.26. Also, the maximum stress triaxiality and equivalent plastic strain (PEEQ) at this process temperature reached to 0.5 and 0.1, respectively.