A procedure for designing natural water retention measures in new development areas under hydraulic-hydrologic invariance constraints

Abstract

AbstractIn recent years, in Italy and elsewhere, regional regulations based on hydraulic-hydrologic invariance (HHI) principles have taken hold, especially for new development areas. Natural water retention measures (NWRMs) are among the most interesting options to provide the storage and infiltration capacities that are needed to achieve the HHI objectives. A procedure for the design of NWRMs in new development areas under HHI constraints is presented and is based on a simple combination of Soil Conservation Service Curve Number (SCS-CN) method for determining rainfall excess and lag-time method for simulating runoff propagation. Three types of NWRMs can be considered: rain barrels, drainage wells and drainage trenches; five types of synthetic hyetographs can be selected and three different approaches for the determination of critical storm duration applied. The results obtained by applying the procedure in a new development area located in northern Italy are illustrated and some general conclusions are drawn. It clearly emerges that practitioners should pay particular attention to the correct determination of design storm duration in order to avoid large underestimations of NWRMs size. Moreover, different combinations of the three NWRMs can provide the required reduction of peak of runoff after the transformation, but it appears that drainage trenches are more effective with respect to harvesting systems in reducing the peak runoff value.