Abstract

The subgrid-scale terms for different formulations of the energy equation are evaluated from a-prioritests using the direct numerical simulation (DNS) data of a compressible mixing layer at a moderate Mach number of M = 0.65. To extend the generality of the results, the simulations were performed with three different initial conditions for the velocity fields. To examine the impact of strong temperature variations on the subgrid scales, a non-isothermal mixing layer with lower to upper free-stream temperature ratio of 3 is also considered. For cold simulations, with equal free-stream temperatures, the total energy equation is shown to be the best choice in view of the accuracy and the subgrid-scale modelling requirements. For hot simulations, with the free-stream temperature ratio equal to 3, the total enthalpy equation is found to be the best formulation for the energy equation. Furthermore, it is shown that the subgrid-scale pressure dilatation term, which has been largely neglected so far, is of the same order of the subgrid-scale heat flux. Based on the present results, the contribution of the subgrid-scale pressure dilatation can be up to 46% of the total sugbrid-scale activity. Moreover, the time evolutions of the volume-average mean kinetic energy, turbulent kinetic energy, production, dissipation, and pressure dilatation terms are considered. Unlike the subgrid-scale pressure dilatation term, the volume-average pressure dilatation terms are negligible, and compressibility does not affect the large-scale evolutions of the mean and turbulent kinetic energies.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call