Abstract
In this paper a significant advance in the piezoelectric properties of poly(vinylidenefluoride-trifluoroethylene)-lead zirconate titanate (P(VDF-TrFE)-PZT) composite ink has been achieved by coating the ceramic particles prior to formulation with a polymeric surfactant containing carboxylic acid anhydride functional groups and the piezoelectric response of a unimorph cantilever is further enhanced by introducing a reinforced substrate. The measured effective transverse piezoelectric coefficient (d31eff) was -56 pm/V, which is 3.3 times higher than that of the same composite without surfactant and is the highest reported for a printable polymer-ceramic composite. In addition, the printability of the ink and dispersion of the ceramic particles was enhanced. The samples were fabricated by stencil printing of a single piezoelectric layer on a flexible PET substrate followed by curing at only 120°C, thus enabling utilization on a wide range of substrates. The results also show the improved particle dispersion and layer quality in 0-3 composite inks with surfactant added and the effect of sample structure and mechanical coupling between the hard ceramic particles and the soft matrix. The developed composite ink is suitable, for example, in sensors in printed wearable and portable electronics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
