A Preliminary Study of the Influence of Graphene Nanoplatelet Specific Surface Area on the Interlaminar Fracture Properties of Carbon Fiber/Epoxy Composites.

Abstract

Graphene nanoplatelets (GNPs) are of particular interest to the field of nano-reinforced composites since they possess superior mechanical, fracture, thermal, and barrier properties. Due to their geometrical characteristics, high aspect ratio (AR)/specific surface area (SSA) and their planar structure, GNPs are considered as high-potential nanosized fillers for improving performance of composites. The present study investigates the effect of SSA of GNPs on fracture properties of carbon fiber reinforced polymers (CFRPs). For this reason, two nano-doped CFRPs were produced by using two types of GNPs (C300 and C500) with different SSAs, 300 and 500 m2/g, respectively. Both types of GNPs, at the same content of 0.5 wt%, were added into the epoxy matrix of composites by applying a three-roll milling technique. The nanomodified matrix was used for the manufacturing of prepregs, while the final composite laminates were fabricated through the vacuum-bag method. Mode I and II interlaminar fracture tests were carried out to determine the interlaminar fracture toughness GIC and GIIC of the composites, respectively. According to the results, the toughening effect of C500 GNPs was the strongest, resulting in increases of 25% in GIC and 33% in GIIC compared with the corresponding unmodified composites. The activation of the absorption mechanisms of C500 contributed to this outcome, which was confirmed by the scanning electron microscopy (SEM) analyses conducted in the fracture surfaces of specimens. On the other hand, C300 GNPs, due to disability to be dispersed uniformly into the epoxy matrix, did not influence the fracture properties of CFRPs, indicating that probably there is a threshold in SSA which is necessary to achieve for improving the fracture properties of CFRPs.