Abstract
Problem statement: Combining the properties of Multiple Input Multiple Output (MIMO) systems with those of Orthogonal Frequency Division Multiplexing (OFDM), MIMO-OFDM was considered to be a promising technique in the future of wireless communications. However, its sensitivity to frequency offsets which results in Inter-Carrier Interferences (ICIs) makes it necessary to use an exact frequency offset estimation method for data recovery in the MIMO-OFDM receiver. Approach: In this study, a new preamble-based frequency offset compensation method was introduced in frequency domain. In each block, two preambles are used to initially obtain the channel coefficients through LS channel estimation method. A polynomial curve fitting algorithm was then applied so that the frequency offsets experienced by every single data subcarrier are separately determined. Finally, to improve the compensating process, an iterative algorithm was applied. Results: Simulation results clearly showed that our proposed method was accurate in multipath fading channels and precisely recovered the transmitted data symbols. The BER performance of the iterative algorithm is within an acceptable distance of that in the ideal channel. Conclusion: In comparison with the conventional methods, our proposed scheme was less complex and showed better performance in lower SNRs. For further research, it can be investigated and improved while considering correlated antennas and spatial multiplexing.
Highlights
Orthogonal frequency division multiplexing is being very much interested, in comparison with single carrier techniques, as it divides a high data rate stream into a number of low data rate sub-streams, being simultaneously transmitted on orthogonal subcarriers
Some frequency offset estimation methods have been introduced for Multiple Input Multiple Output (MIMO)-Orthogonal Frequency Division Multiplexing (OFDM) systems in recent years
A preamble-based frequency offset compensation scheme is completely introduced. It uses two preambles in each block of data to compensate for all the frequency offsets that it experiences while passing through the channel
Summary
Orthogonal frequency division multiplexing is being very much interested, in comparison with single carrier techniques, as it divides a high data rate stream into a number of low data rate sub-streams, being simultaneously transmitted on orthogonal subcarriers. The receiver uses some known symbols sent by the transmitter to estimate the frequency offsets and to perform the frequency synchronization. Some frequency offset estimation methods have been introduced for MIMO-OFDM systems in recent years.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.