Abstract
The design and manufacturing process for a porous-restricted aerostatic lead screw actuator (ALSA) is presented. The ALSA provides near-frictionless motion with submicron positioning accuracy, high stiffness at low inlet air pressures (<827 kPa), and a travel length of 50 mm. Porous graphite disk inserts are held in a helical pattern in an aerostatic nut housing against a lead screw thread to create multiple simultaneous air bearing surfaces. A wave spring flexure is inserted behind each graphite disk to provide a preload and ensure full contact between the porous graphite disk surface and the lead screw flank. When the wave spring flexures and graphite disks are potted in combination with a slow-curing epoxy, this creates a self-aligning method to consistently match all graphite disk insert surfaces to the helical profile of the lead screw thread. Experimental trials were performed to evaluate the performance of the manufactured ALSA. It was found that a stable nut with a per-thread stiffness of 9.7 N/μm was achievable with a 3.5 μm air gap and an overall permeability of 5.4 × 10−15 m2. Applications requiring higher stiffness may couple two or more single-threaded nuts to achieve the desired actuator stiffness.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
