Abstract
This study introduces a variable-stiffness pneumatic bending actuator to enhance the stiffness of flexible robots. The bending actuator combines the working principles of a pneumatic drive, a wedge structure, and particle blockage. It enables one-dimensional, bidirectional bending motion and offers pose-maintenance capabilities. The approach to variable-stiffness is both driven and antagonistic. Stiffness in both bending and opposite directions is nonlinearly correlated with air pressure values. Specifically, at 0.5 MPa of air pressure, the stiffness in the bending direction increases to 6.1 times the initial stiffness. At 0.15 MPa, the stiffness in the opposite direction is 2.1 times the initial value. When air pressure is greater than 0.15 MPa, the stiffness incrementally increases due to the wedge impedance force. A driven variable-stiffness control is simple and suitable for applications with a constant load direction, while the antagonistic approach is more suitable for occasions where the load direction changes during movement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
