A pilot study to measure vascular compliance changes during fistula maturation using open-source software.

Abstract

Autogenous arteriovenous fistulas are the preferred access for hemodialysis. Yet when created, fistulas often fail to mature, requiring surgical or radiologic interventions before their use. This pilot study measures the vascular wall elasticity and flow gradient using an open-source ultrasound software program designed to aid in assessing fistula maturation. A total of seven end-stage renal disease patients were enrolled for our study after providing informed consent. Ultrasound scanning was performed for the inflow artery, post-arterial anastomotic segment, and outflow vein at initial and follow-up evaluation. Conventional digital imaging and communications in medicine data were collected from the ultrasound machine. The vessel diameter and distensibility of artery, post-arterial anastomotic segment, and vein were computed from the digital imaging and communications in medicine data using an open-source ultrasound software program. The vessel diameter of artery and vein increased from 4.6 ± 1.1 mm to 6.0 ± 1.1 mm and from 5.8 ± 0.7 mm to 7.5 ± 0.9 mm from 1 to 6 weeks post-operation, respectively. Conversely, the vessel diameter of post-arterial anastomotic segment decreased from 4.2 ± 1.0 mm to 3.5 ± 0.9 mm from 1 to 6 weeks post-operation. The distensibility of artery and post-arterial anastomotic segment increased from 3.4% ± 0% to 5.9% ± 1.1% and 3.7% ± 1.2% to 4.9% ± 1.4%, respectively, while the distensibility of vein decreased from 5.0% ± 1.3% to 2.6% ± 0.4% from 1 to 6 weeks post-operation. This study demonstrates that the change in vessel diameter and distensibility related to the healthy remodeling as the vein dilates during maturation.