Year-end Sale % OFF 
Abstract
Low-temperature cofired ceramic (LTCC) has proven to be a cost-effective, flexible technology for producing complicated structures such as sensors, actuators, and microsystems. This paper presents a piezoelectric active mirror suspension system embedded into LTCC. In the structure, the LTCC was used as a package, for the passive layers of piezoelectric monomorphs, as support for the mirrors, and as a substrate for the conductors. The active mirror structure, 17 mm in diameter, was made by compiling 20 LTCC layers using common LTCC processing techniques. Each sample contained a laser-micromachined bulk lead zirconate titanate (PZT) structure which formed a monomorph with the LTCC during the firing process. A mirror substrate (diameter 4 mm) was mounted in the middle of the monomorph arms for evaluation of the positioning performance, where each of the three arms had independent signal electrodes and a common ground electrode. Electrical and electromechanical properties were investigated with an LCR meter, network analyzer, and laser vibrometer for the different arms and the mirror. The active mirror structure exhibited more than 1 μm dc displacement for mirror leveling and also allowed small changes in mirror angle up to 0.06°. The first bending resonance frequency of the structure with the mirror was detected at 11.31 kHz with 4.0 μm displacement; 13.02 kHz and 2.7 μm were obtained without the mirror. The structure exhibited characteristics feasible for further utilization in tunable Fabry-Perot filter applications, allowing the mounting of active mirrors on both sides with distance and angle control.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
