A passive SPICE model for rectennas

Abstract

PurposeThis paper aims to present a SPICE model to represent antennas in receiving mode. The model can be used to evaluate the performance of the antenna when it is coupled to several different nonlinear electric circuits. The proposed methodology is particularly suitable for rectenna applications, as it allows the analysis of different configurations for a rectenna more efficiently than using full-wave analysis simulators coupled directly to each rectifier circuit.Design/methodology/approachThe model presented uses reciprocity theory to calculate the ideal voltage source of the Thevenin-equivalent circuit for an antenna. Vector fitting is then used to approximate the model to rational functions that can be converted to Resistor, Inductor and Capacitor circuits. Additional components are added to the circuit to prevent numerical instability.FindingsTwo rectennas are used to illustrate the performance of the proposed model, one based on a 2.45-GHz rectangular patch antenna and another based on a planar spiral antenna. The second antenna has impedance with positive and negative real parts along the frequency range, which could lead to numerical instabilities. The proposed method is shown to be stable while working with these negative resistance values, which may appear during circuit parameterization.Research limitations/implicationsThe equivalent SPICE circuit model for the antenna makes it easy to simulate nonlinear circuits connected to the antenna and perform transient analyses. The computational cost of antenna analysis is reduced, being more computationally efficient than methods that involve full-wave simulation. This characteristic makes it an interesting approach for working with rectennas, or any application where the time constant of the circuit is much longer than the period of the incident wave.Originality/valueFor most antenna applications, the numerical stability of the circuit can be achieved using passive enforcement. However, depending on the phase response of the antenna, the impedance that represents its far-field characteristic may present a negative real part, in which case, passive enforcement will fail. In this paper, the problem of numerical instability is solved by introducing an offset resistance and a current-controlled voltage source to the model.