Abstract
In this study, a partially etched structure of a light‐addressable potentiometric sensor (LAPS) is fabricated for high‐spatial‐resolution and high‐speed imaging of chemical species. An anisotropic etching process based on tetramethylammonium hydroxide (TMAH) is optimized to fabricate the structure, which strikes a balance between the imaging performance and the mechanical strength of the sensor plate. The etched region of the sensor plate with a thickness of 47 µm yields a 12‐fold enhancement of the photocurrent signal at a high frequency of 120 kHz and a 10‐fold frequency bandwidth in comparison with the frame region with a thickness of 150 µm due to the reduced traveling distance of charge carriers inside the semiconductor. This result represents a new approach for high signal‐to‐noise ratio, high‐spatial‐resolution, and high‐speed measurement.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
