Abstract
The concurrent activation and surface modification (CAM) process is an integrated process used to synthesise palm kernel shell derived activated carbon (PKSdAC) in this study. CAM involves chemical activation and surface modification via metal impregnation in one process. This study investigated the usage of different acids as chemical activators and different soaking procedures for impregnating barium (Ba) in CAM-PKSdAC. It shows that chemical impregnation of PKS using 10% sulphuric acid (H2SO4) mass loading via two soaking steps can impregnate a high Ba amount of 0.86–2.98 wt. % in CAM-PKSdAC, compared to one soaking step. The two soaking steps procedure reduced the overage formation of BaSO4 from sealing the pores of PKS. Comparing HCl and H2SO4, at 30% acid mass loading, the impregnation of PKS with H2SO4 produced a higher impregnated Ba amount in CAM-PKSdAC. BaSO4 generated from the reaction between H2SO4 on the PKS surface with BaCl2 solution causes a reduction reaction at high temperatures. BaSO4 reacted with a carbon-reducing agent and is reduced to barium sulphide (BaS), impregnating Ba on CAM-PKSdAC. In conclusion, H2SO4 was found to be the suitable chemical activator with two soaking steps for the CAM process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
