Abstract

Paraquat is a highly toxic herbicide. Paraquat poisoning is often fatal and is an important public health threat in many places. The quick identification and timely initiation of treatment based on timely analysis of the paraquat concentration in urine/serum could improve the prognosis for patients. However, current paraquat concentration measurements are time-consuming and difficult to implement due to the expensive and bulky equipment required. To address these practical challenges, paper-based devices have emerged as alternative diagnostic tools for improving point-of-care testing. In this study, we demonstrate the successful use of a paper-based analytical device for the accurate detection of urine paraquat concentration. The developed paper-based analytical device employs colorimetric paraquat concentration measurements. The R2 value for the urine paraquat standard curve was 0.9989, with a dynamic range of 0–100 ppm. The limit of detection was 3.01 ppm. Two other optical-based approaches, Spectrochip and NanoDrop, were used for comparison. The results suggest that the developed paper-based analytical device is comparable to other colorimetric measurements, as determined by Bland–Altman analysis. The device was clinically validated using urine from six paraquat-poisoned patients. The results prove that the developed paper-based analytical device is accurate, easy-to-use, and efficient for urine paraquat concentration measurement, and may enable physicians to improve clinical management.

Highlights

  • Paraquat (N,N -dimethyl-4,4 -bipyridinium dichloride) is one of the most widely used herbicides in the world

  • Various methods of measuring paraquat concentration have been proposed, including high-performance liquid chromatography (HPLC)/mass spectrometry (MS), gas chromatography (GC)/MS, and photometry coupled with a sodium dithionite assay [1,10,11]

  • This study demonstrates the novel design of a paper-based analytical device for detecting paraquat poisoning

Read more

Summary

Introduction

Paraquat (N,N -dimethyl-4,4 -bipyridinium dichloride) is one of the most widely used herbicides in the world. Patients with semiquantitative urine test results showing darker than navy blue (>10 ppm) in the initial 24 h have a high probability of death [5,8] This semiquantitative urine test using the sodium dithionite reaction is the pioneer of point-of-care test application in clinical toxicology. Various methods of measuring paraquat concentration have been proposed, including high-performance liquid chromatography (HPLC)/mass spectrometry (MS), gas chromatography (GC)/MS, and photometry coupled with a sodium dithionite assay [1,10,11]. The device is subjected to clinical validation using urine samples from six paraquat-poisoning patients

Chemicals
Colorimetric Assay
Spectrochip and NanoDrop
Clinical Validation and Collection of Patient URINE Samples
Paraquat Detection with the Paper-Based Analytical Device
Clinical Validation Using Six Patient Urine Samples
Discussion
Conclusions
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call