Abstract
Silver nanowires (AgNWs), appear as an extremely promising candidate for the next generation of flexible transparent conductive electrodes (FTCEs). However, the performance of AgNWs-FTCEs was severely limited by the aspect ratio of AgNWs, while it was still a big challenge to fabricate AgNWs with high aspect ratio nowadays. To improve the aspect ratio of AgNWs, bromide ion (Br−), cupric ion (Cu2+) and polyvinylpyrrolidone (PVP, Mw ≈ 1300 000) which are beneficial for the synthesis of high aspect ratio AgNWs, were introduced in this article. The high quality and uniform AgNWs with the average diameter of 77.6 nm and the aspect ratio above 2000 were fabricated via a one-step solvothermal method. The effects of reaction time, molar ratio of AgNO3 to PVP and the concentration of CuBr2 on the aspect ratio of AgNWs were discussed. The mechanism of the synthesis of high aspect ratio AgNWs was explored. After that, the prepared AgNWs were spin-coated on the surface of PET film, the FTCEs based on the ultra-high aspect ratio AgNWs without any post-treatments exhibits relatively high transmittance, low haze and low sheet resistance, and the AgNWs have little effect on the optical performance of pristine PET film. The outstanding performance of the prepared FTCEs indicated that the ultra-high aspect ratio AgNWs are ideal materials in the application of FTCEs, and the method of fabricating AgNWs could provide a direction to the high aspect ratio AgNWs.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.