Abstract
AlN/aluminizing coating with good corrosion resistance on carbon steel was prepared by one-step powder pack method. The phase compositions were analyzed by X-Ray diffraction spectrum (XRD). The cross-sections were investigated by scanning electron microscope (SEM) equipped with an energy dispersive X-ray spectrometer (EDS). According the analysis above, the appropriate powder formula and technological parameter were determined: 40 wt.% Al + 50 wt.%Al2O3 + 5 wt.% NH4Cl + 5 wt.%CeO2, heating from 800 °C and maintaining at 900 °C for 6 hours. The corrosion resistance of specimen with AlN/aluminizing coating were measured by electrochemical test. The electrochemical measurement suggested that the corrosion resistance property of carbon steel was remarkably improved by fabricating AlN/aluminizing film. The process of pack cementation method in this fabrication is very simple, low-cost and facile, which opens a promising and effective path for industrial applications for AlN/aluminizing coating on various metallic materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.