Abstract

The flap side-edge is a vital contributor to airframe noise. In this study, we propose a novel flap side-edge noise reduction method based on the concept of active blowing air. A long slot is opened from the flap’s lower surface to the tip surface to induce a secondary jet flow, which is driven by the local pressure difference between the flap’s lower surface and the tip surface. The unsteady flow field around the flap side-edge was computed by the lattice Boltzmann solver PowerFLOW, and the far-field noise was predicted by the FW-H equation. It is demonstrated that the dominant features of the flap side-edge flow are the double vortex structures, and the new passive blowing air reduction method can achieve about 3.3 dB noise reduction. Moreover, the underlying noise reduction mechanism has been analyzed and revealed. It is shown that the secondary jet flow from the long slot on the flap side-edge would dissipate the flap side-edge vortex and displace the flap side-edge vortical structure away from the flap surface, thus resulting in a decrease in the pressure fluctuations on the flap side-edge surface. As a result, the flap side-edge noise was reduced. In contrast to the current active air blowing technique, the newly proposed blowing air technique is passive and quite simple and does not require an extra air source or control system. This novel flap side-edge noise reduction technology provides a new flow control strategy and noise reduction methodology and can be further optimized.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call