Abstract
A three-dimensional Computational Fluid Dynamics (CFD) model based on the VOF method is developed to investigate the hydrodynamic characteristics of falling film over horizontal tubes. The model not only considers gravity and surface tension, but also considers drag force when counter-current gas flow is imposed. For different liquid flow rates, laminar model, and k-ε turbulence model are employed to improve the model accuracy. Simulations are performed for the film Re varying from 100 to 1000 and gas flow rate ranging from 0m/s to 0.5375m/s. Based on the simulations, the gas flow effects on flow mode transitions agree well with the experimental data. In the circumferential direction, all bulk film thicknesses increase with the increased gas flow rate in the three basic flow modes — droplet, column, and sheet. In both the droplet and column flow mode, the position in which the thinnest film is located changes when gas flow is imposed. In the axial direction, the maximum film thickness is approximately twice that of the minimum in the droplet flow mode. Regular stable–crest–stable distribution can be observed in the column flow mode and the film distribution nearly has no variation in the sheet flow mode over time.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
